In-Cab Inverter 400W In-Motion Wire Harness DIY Package

PURPOSE:

The purpose of this feature is to prevent your inverter from kicking down to 100W as designed while your vehicle is in-motion and transition it to stay on 400W when you shift from Park to operate ANYTIME. This complete DIY Package allows you to install up to 3 AC 120V 400W POWER OUTLETS where you could actually use them on-the-go!

PRODUCT DETAIL:

The IN-CAB 400W IN-MOTION WIRE HARNESS connects directly to the OEM Inverter. There is a ground terminal attached to the wire harness that will be placed to a nearby bolt of your choice.

Depending on your vehicle Tacoma/4Runner, you will need to purchase a couple items still once you do receive our package. The junction block and the Power Outlets (1 to 3) are not included in this wire harness kit. If you are installing this mod on a Tacoma, the inverter is located under the armrest of the front seat center console. You will need to remove the center console trim pieces to get to the inverter plug. If you are installing this mod on a 4Runner, the inverter is in the back of your rig on the passenger side behind the wheel hub cover where your 400w power outlet is located. You will need to remove that trim panel cover to locate your inverter plug.

REQUIREMENTS:

This will require removing interior panel pieces inside your vehicle, as well as a couple other parts to have access to where your OEM Inverter is located depending on the make of your vehicle. You may also be required to cut a hole in your interior panel to mount your Power Outlet (not included with this Kit) inside your Cab depending on your placement of choice. This is 100% Plug-N-Play. 

INCLUDED IN THE DIY PACKAGE:
1x - In-Cab Inverter 400W In-Motion Wire Harness
1x - In-Cab Junction Block Wire Harness
1x - In-Cab 120V 400W Power Outlet Wire Harness - 19"
2x - In-Cab 120V 400W Power Outlet Wire Harness - 12"

2x - In-Cab 400W In-Motion Wire Harness Extension - 5ft

OTHER OPTIONS AVAILABLE FOR PURCHASE:

1x - In-Cab 400W In-Motion Wire Harness Extension - 10ft

TOYOTA PART NO. FOR ITEMS SELLER RECOMMENDS (NOT INCLUDED):
Up to 3x - AC 120V 400W Power Outlet (Part No 85530-35050-C0)
1x - Junction Block (Part No 82671-30360) 
1x - Bezel Power Outlet (Part No 85536-35020)
1x - USB Power Port (Part No 00016-00225)

1x - Toyota Power Outlet Socket Assembly (Part No 85530-35100-B0)