DRIVER’S SIDE GRAB HANDLE w/ A PILLAR - PRE-ORDER
*Production on the MOLD has been completed.
*Production phase is about to begin on the 1000 (700 Grey, 300 Beige) Grab Handles for the 4Runners and is projected to start after the Thanksgiving Holiday.
*The 1000 Driver’s Side Grab Handles will be shipped to the KTJO 4x4 Warehouse by Sea. From there it will get picked up by Express and get through Customs. Followed by being transported by DHL/UPS/FedEx to the Warehouse here in Oregon to be Delivered.
If your 4Runner did not come with a Grab Handle on the A-Pillar, then this is the Package that you need. It will utilize the OE parts to add the Driver’s Side Grab Handle to your 4Runner.
This is a Molded A Pillar w/ a Grab Handle that Mirrors our Passenger Side A Pillar w/ Grab Handle. It is a complete Kit that comes with everything you will need to switch out your current OEM A Pillar that did not come with a Grab Handle.
ITEMS INCLUDED (DEPENDING ON COLOR):
1x - B0-Grey Replacement Windshield Pillar Trim, Left
1x - B0-Grey Replacement Grip Handle
1x - E0-Beige Replacement Windshield Pillar Trim, Left
1x - E0-Beige Replacement Grip Handle
ADDITIONAL PACKAGE CONTENTS INCLUDED:
1x - Installation Instructions - 4Runner Grab Handle (Located on Website)
1x - Trim Panel Remover
1x - M6x1.0x35mm Hex Bolt w/ Washer*
1x - M6x1.0x20mm Hex Bolt w/ Washer*
1x - M6x10mm Nut*
This will require removing the Driver's Side OEM A Pillar out from your vehicle. This Driver's Side Grab Handle w/ Side A Pillar will be a direct replacement for your OEM factory A Pillar.
*Will need to install the handle onto the A-Pillar Trim prior to installing into the vehicle. Otherwise it will be difficult to install the Hex Bolt into the desired location.
LEGAL TERMS, LIMITED WARRANTY, TERMS AND CONDITIONS:
These kits and website contain the information necessary for installing your DRIVER’S SIDE GRAB HANDLE w/ A PILLAR & RIGHT & LEFT REAR OEM GRAB HANDLES w/ OEM SIDE B PILLARS. If any questions arise, contact your installation dealer or KTJO 4x4.
These kits and website are designed for the installer or individual with an existing understanding of automotive systems, along with the ability to test and connect wires for proper operation. To ease installation for the DRIVER’S SIDE GRAB HANDLE w/ A PILLAR, we suggest that you READ THIS GUIDE before beginning your installation.
*CHECK OUT KTJO 4x4 DRIVER'S SIDE GRAB HANDLE INSTALL GUIDE*
KTJO 4x4 and its vendors shall not be liable for any accident resulting from the use of this product. This system is designed to be professionally installed into a vehicle in which all systems and associated components are in perfect working condition.
Calculated at Checkout