RIGHT & LEFT REAR GRAB HANDLES W/ B PILLARS - PRE-ORDER
*Production on MOLD has been pushed back for this R&L Rear Grab Handles and are currently underway now. Mold is projected to take 20-30 days to produce, but we have asked for an exact date for when it should be completed. After the mold process, we will enter into the Production phase which will take another 30 days to produce 1000 (800 Black, 200 Grey) Grab Handles for the Tacoma. To complete the Production phase process, the 1000 R&L Rear Grab Handles will be shipped to the KTJO 4x4 Warehouse by Sea which will take 15-20 days, 3-5 days to get picked up by Express and get through Customs and get picked up by UPS/FedEx, and then another week to be Delivered. Shipment to Customers will start a week later.*
If your Tacoma did not come with a Grab Handle on the B-Pillar, then this is the Package that you need. It will utilize the OE parts to add the Toyota Grab Handle to your Tacoma. Just select whether you would like the Left & Right Side Combination Package or the Single Purchase Item for the Right Side or Left Side with your Color Selection in the drop down menu to get the one that you need.
These will be Molded B Pillars w/ a Grab Handle that Mirrors your Front Driver/Passenger Side Grab Handles. It is a complete Kit that comes with everything you will need to switch out your current Upper B Pillar Sections that did not come with a Grab Handle.
ITEMS INCLUDED (DEPENDING ON COLOR):
1x - B1-Grey Replacement Upper Center Pillar Trim, Left & Right
1x - B1-Grey Replacement Grip Handle
1x - C1-Black Replacement Upper Center Pillar Trim, Left & Right
1x - C1-Black Replacement Grip Handle
ADDITIONAL PACKAGE CONTENTS INCLUDED:
1x - Installation Instructions - Tacoma Grab Handle (Located on Website)
1x - Trim Panel Remover
1x - M6x1.0x35mm Hex Bolt w/ Washer*
1x - M6x1.0x20mm Hex Bolt w/ Washer*
1x - M6x10mm Nut*
*INSTALL THE HANDLE ONTO THE B PILLAR WITH THE HEX BOLT W/ WASH & NUT PRIOR TO MOVING INSIDE THE THE VEHICLE.
This will require removing the Right & Left Rear B Pillars out from your truck, as well as, a couple other parts like the Seat Belt Hardware around the panels to have access to where the upper section is anchored down by a hidden bolt. You can remove it completely or just leave this section intact. It is completely up to you. Again, these Right & Left Rear Grab Handles w/ Side B Pillars will be a direct replacement for your upper section of your factory B Pillars.
LEGAL TERMS, LIMITED WARRANTY, TERMS AND CONDITIONS:
These kits and website contain the information necessary for installing your RIGHT & LEFT REAR GRAB HANDLES w/ SIDE B PILLARS. If any questions arise, contact your installation dealer or KTJO 4x4.
These kits and website are designed for the installer or individual with an existing understanding of automotive systems, along with the ability to test and connect wires for proper operation. To ease installation for the RIGHT & LEFT REAR GRAB HANDLES w/ SIDE B PILLARS, we suggest that you READ THIS GUIDE before beginning your installation.
*CHECK OUT KTJO 4x4 R&L REAR GRAB HANDLES INSTALL GUIDE*
These guides and website are provided as GENERAL GUIDELINES and the information contained herein may differ from your vehicle.
KTJO 4x4 and its vendors shall not be liable for any accident resulting from the use of this product. This system is designed to be professionally installed into a vehicle in which all systems and associated components are in perfect working condition.
Calculated at Checkout